collared eye bolt lifting capacity chart

Eye Bolt Lifting Capacity Chart It is important not to exceed the working load limit of the eye bolt. An adjustment of the working load may be necessary for angular lifting with nut eye bolts. You will also need to ensure that nuts are tightened securely against the corresponding loads and applied in the plane of the eye. Where to Next?

Use a spreader bar with regular (non-shoulder) eye bolts to keep the lift angle at 90° to the horizontal. Use eye bolts at a horizontal angle greater than 45°. Sling strength at 45° is 71% of vertical sling capacity. Eye bolt strength at 45° horizontal angle drops down to 30% of vertical lifting capacity. Use a swivel hoist ring for angled lifts.

Shoulder Eye Bolts Never Exceed Working Load Limits. Never use regular nut eye bolts for angular lifts. Always use shoulder nut eye bolts for angular lifts. For angular lifts, adjust working load as shown above. Always tighten nuts securely against the load. Always apply load to eye bolt in the plane of the eye.

It can crush all kinds of coarse, medium and fine materials (granite, limestone, concrete, etc.) with a feed particle size not exceeding 500mm and a compressive strength not exceeding 350MPa. , Energy, cement, chemical, construction and other industries

Further maximum lifting capacity has separately been given for axial provision of a collar adds substantially to the strength of an eyebolt and eye-.

Machinery eye bolts without shoulders are used for vertical or inline lifting or objects up to their specified capacity. Eye bolts without a shoulder should not be used for angular or off-center loads. These eye bolts come in a plain steel finish for use in dry environments or zinc-plated finish for corrosion resistance in wet environments.

Eye bolts can be utilized with much of our lifting gear range. We are able to supply a vast range of eye bolts which have different features to suit a wide array of tasks. Long shank eye bolts, dynamo eye bolts and collared eye bolts are all popular eye bolts. Most of our eye bolts can be purchased in metric or BSW Witworth sizes ranging up to

Part No. Metric Size A Thread Size B Shank Length, mm C I.D. Eye, mm Approx. Wt. Per 100 Pcs. in Lbs. Working Load Limit in Kgs. Working Load Limit in Lbs. 13850 5 M8 M8 x1.25 76.0 25 19 450 992 13895 6 M12 M12 x 1.75 76.0 30 45 1,030 2,266 13936 6 M16 M16 x 2.0 76.0 35 85 1,600 3,520 13958 8 M18 M18 x 2.5 76.0 38 113 2,140 4,708

Eye Bolts Dimensions · DIN 444 - Swing Eye bolts · Equivalent norms: CSN 21167; PN 82425; UNI 6058; · DIN 580 - Lifting Eye Bolts (Collar eyebolts for lifting 

Australian Standard AS 2317.1 - Maximum Working Load Limit (WLL) in tonnes NOTES: The included angle, between the legs of every two-leg sling connected to a load by a pair of eyebolts or eyenuts, should not exceed 90 degrees.

40 c60302 comp.cylinder head 1 50 c60303 cap,sealing 1 60 c60304 plug 2 70 c60305 guide,inlet valve 3 80 c60306 guide,exhaust valve 3 90 c60307 cap,sealing 2 100 c60308 bolt,head(cylinder) 14 110 c60309 gasket,cylinder head 1. frame bushing of crusher impact columbia steel buildings hp200 piston seal cone crusher parts dubai piston aura